klep suku / tipe Weir diafragma klep
| Ukuran | DN40 nepi ka DN300 |
| Standar | ANSI, DIN, BS, JIS, API, jsb. |
| Bahan | Beusi tuang, Beusi ductile |
| Tekanan Nominal | PN10, PN16, CL125, CL150, JIS5K, JIS10K |
| 1 | Standar Desain nurutkeun EN1074-5 |
| 2 | Pangeboran Flange nurutkeun DIN, BS, ANSI, JIS, jsb. |
| 3 | Tekanan Nominal: PN10, PN16, CL125, CL150, JIS5K, JIS10K |
| 4 | Suhu gawé: 0-80 ℃ |
| 5 | Medium Cocog: Cai, Minyak, Gas |
| Tekanan Nominal | PN10/PN16 | Kelas 125/150 |
| Tekanan cangkang | 24 bar | 300 PSI |
| Tekanan korsi | 17,6 bar | 200 PSI |
| No. | Ngaran Bagian | Bahan | Standar |
| 1 | Awak | Beusi ulet atanapi Gray matak Beusi | GGG50/GG25 |
| 2 | Bonét | Beusi ulet atanapi Gray matak Beusi | GGG50/GG25 |
| 3 | Cinyusu | 65Mn | - |
| 4 | Batang pituduh | Beusi sténless | 2Cr13 |
| 5 | O-cingcin | NBR | - |
| 6 | Disk | Beusi ulet kalawan NBR | GGG50 |
| 7 | Nut | Baja Karbon | A3 |
| 8 | Tukang cuci | Baja Karbon | A3 |
| 9 | Nut | Baja Karbon | A3 |
| 10 | Tukang cuci | Baja Karbon | A3 |
| 11 | leungeun baju | Beusi sténless | SS304 |
| DN | D | D1 | D2 | H | b | f | z-d |
| 40 | 150 | 110 | 84 | 148 | 18 | 3 | 4-19 |
| 50 | 165 | 125 | 99 | 166 | 20 | 3 | 4-19 |
| 65 | 185 | 145 | 118 | 201 | 20 | 3 | 4-19 |
| 80 | 200 | 160 | 132 | 221 | 22 | 3 | 8-19 |
| 100 | 220 | 180 | 156 | 265 | 24 | 3 | 8-19 |
| 125 | 250 | 210 | 184 | 300 | 26 | 3 | 8-19 |
| 150 | 285 | 240 | 211 | 360 | 26 | 3 | 8-23 |
| 200 | 340 | 295 | 266 | 470 | 30 | 3 | 12-23 |
| 250 | 405 | 355 | 319 | 568 | 32 | 3 | 12-28 |
| 300 | 460 | 410 | 370 | 653 | 32 | 4 | 12-28 |
| Catatan: Desain kami tiasa cocog pikeun sadaya standar (BS, DIN, ANSI, JIS, jsb.) | |||||||
| No. | Ngaran Bagian | Bahan |
| 1 | Awak | Beusi tuang, Beusi tuang sareng karét atanapi PTFE |
| 2 | Bonét | Beusi tuang |
| 3 | Disk | Beusi tuang |
| 4 | Kabayang leungeun | Beusi ulet atanapi Gray matak Beusi |
| 5 | Diafragma | NBR, PTFE, karét |
| 6 | Batang | Baja Karbon |
| 1 | Desain Standar nurutkeun BS5156 |
| 2 | Nyanghareupan nurutkeun BS5156 |
| 3 | Pangeboran Flange nurutkeun BS4504 |
| 4 | Tekanan nominal: PN10, PN16 |
| 5 | Suhu gawé: ≤120 ℃ |
| 6 | Medium Cocog: Cai, Minyak, Gas |
| Tekanan Nominal | PN10 | PN16 |
| Tekanan cangkang | 15 bar | 24 bar |
| Tekanan korsi | 11 bar | 17,6 bar |
| Diaméterna nominal | Tekanan Nominal (MPa) | Tekanan Gawé (MPa) | L | D | D1 | n-Φd | H1 | H2 | Do | Beurat (kg) | |
| DN (mm) | NPS (Inci) | ||||||||||
| 15 | 1/2" | 1.6 | 1.6 | 108 | 95 | 65 | 4-14 | - | - | - | - |
| 20 | 3/4" | 117 | 105 | 75 | 4-14 | 93 | 103 | 66 | 3 | ||
| 25 | 1" | 127 | 115 | 85 | 4-14 | 100 | 112 | 66 | 4 | ||
| 32 | 1 1/4" | 146 | 140 | 100 | 4-18 | 127 | 144 | 96 | 6.5 | ||
| 40 | 1 1/2" | 159 | 150 | 110 | 4-18 | 136 | 156 | 96 | 7.5 | ||
| 50 | 2" | 191 | 165 | 125 | 4-18 | 151 | 177 | 118 | 10 | ||
| 65 | 2 1/2" | 1.0 | 1.0 | 216 | 185 | 145 | 4-18 | 183 | 213 | 165 | 16 |
| 80 | 3" | 254 | 200 | 160 | 8-18 | 198 | 273 | 230 | 23.5 | ||
| 100 | 4" | 305 | 220 | 180 | 8-18 | 266 | 320 | 280 | 34 | ||
| 125 | 5" | 356 | 250 | 210 | 8-18 | 319 | 286 | 280 | 44 | ||
| 150 | 6" | 406 | 285 | 240 | 8-22 | 380 | 453 | 368 | 67.5 | ||
| 200 | 8" | 0.6 | 521 | 340 | 295 | 8-22 | 506 | 626 | 400 | 141.5 | |
| 250 | 10" | 635 | 395 | 350 | 12-22 | 598 | 734 | 500 | 229 | ||
| 300 | 12" | 0.4 | 749 | 445 | 400 | 12-22 | 698 | 778 | 560 | 321 | |
| 350 | 14" | 749 | 505 | 460 | 16-22 | 723 | 883 | 560 | 360 | ||
| 400 | 16" | 0.25 | - | 565 | 515 | 16-26 | 868 | 1078 | 640 | 584 | |
klep régulasi / Kasaimbangan klep
